DEADFLY SYSTEMS
ANTI-DRIP SPRAY NOZZLES

Many nozzles are satisfactory for spraying liquids, but for a positive shut-off, with absolutely no after-dripping, you need the DEADFLY ANTI-DRIP NOZZLES  Our exclusive design produces a precisely controlled flow rate and spray angle, but also with a liquid cut-off at the orifice.
Immediate cut-off can be very important in situations where after-drip can damage or destroy things beneath the nozzle.

With the the DEADFLY ANTI-DRIP NOZZLE operators can achieve this immediate cut-off while maintaining pressure within the nozzle supply system, thus assuring an immediate "sputter free" start-up and no entry of air into the supply line during the off cycle. The the DEADFLY ANTI-DRIP NOZZLE emits a finely atomized spray mist suitable for nearly all humidifying, light wetting and evaporative cooling applications in greenhouses, industry and agriculture. With this nozzle there is no need to install costly individual in-line check valves (that do not stop after drip as effectively any way, since they do not shut off right at the orifice the way the DEADFLY ANTI-DRIP NOZZLE does)

Applications:

Odor Control Chemicals.
Insect Control.
Green Houses.
Environmentally Hazardous Chemicals.

 Availability:

Standard flow rate: 75 GPH @ 160 PSI water.
Spray Angle: 70deg @ 160 PSI, water.
Materials / Construction:

Body and poppet valve: Type 416 Stainless steel.
O-Ring: Viton.
Spring: Stainless steel.
Filter: Sintered bronze rated @ 31-40 mirons nominal filtration.

 Features:

Eliminates dangerous, costly or undesirable nozzle after-drip.
Reliable, self sealing operation.
Field proven performance for over 30 Years.
Accurate, predictable flow rate and spray angle.
Produces a finely atomized mist.
Immediate cutoff.
Sputter-free start up at full atomizing pressure.
Standard in Type 416 stainless steel.

DEADFLY SYSTEMS
ANTI-DRIP SPRAY NOZZLE

Back